tryckkort.se

Artwork that prints well

Design advice and print specifications

We print on finished plastic cards. These tips help you prepare backgrounds, images, and text for the small card format. The editor handles card dimensions and previews for you.

Extend backgrounds beyond the edge

We print on finished plastic cards. A background that reaches the card edge must extend 1 mm beyond it in the artwork. This extra area is called bleed.

Do this

  • Extend background images and color areas 1 mm beyond all four edges.
  • Keep text and logos at least 3 mm inside the card edge.
  • Allow for the rounded corners, which have a radius of 3.18 mm. Keep important content inside them.

Avoid

  • Avoid thin borders right at the card edge; give them a clear inner margin.
  • Do not place important text close to the edge, even if it fits on screen.

Use pure black for text and codes

Black text, barcodes, and QR codes made in the editor can be printed with black resin for sharp edges. Whether a card qualifies for monochrome printing depends on the entire design and selected print mode.

Do this

  • Use #000000 for text, barcodes, and QR codes that a scanner must read.
  • Choose a white or light base card and a calm background behind the code. The editor checks that codes created there have at least 3:1 contrast against the background.
  • For monochrome printing, use black text and codes without photos or filled color areas. Check the print option and price before ordering.

Avoid

  • Do not assume an uploaded black-and-white image qualifies for monochrome printing. Images and shapes may need full-color printing even when they look black.
  • Do not put a barcode over a photo or dark panel.

Images: the right resolution and format

A full-card image including bleed should be at least 1035×661 pixels at 300 dpi. At 600 dpi, use 2069×1322 pixels. Start with an original that has enough detail for a sharp print.

Do this

  • Use at least 1035×661 pixels for a full-card image with bleed at 300 dpi.
  • Upload logos as SVG or high-resolution PNG with a transparent background. SVG is converted to a high-resolution image on import. Avoid screenshots.
  • Embed images in SVG files and convert text to paths to preserve the logo's appearance.
  • Upload a print-ready PDF with one or more cards. Choose pages, pair fronts and backs, and check the crop in the editor. A grid can split several cards on one sheet.
  • PDF artwork is rasterized at 600 dpi. Embed fonts in the PDF. Text and graphics cannot be edited separately after import.
  • Photograph portraits straight on against an even background and check the crop in the editor.

Avoid

  • Avoid small images and screenshots from websites. They may lack the detail needed for print.
  • Do not enlarge a small image to fill the card. Scaling adds no image detail.

Areas that must stay clear

The magnetic stripe, contact chip, and any punched hole occupy space on the card. Keep text, logos, and codes away from these areas and check their placement in the preview.

Do this

  • The magnetic stripe is on the back, 5.54 mm from the top and 12.7 mm high. Keep text on the back outside this area.
  • The contact area of the chip on the front is 12×11 mm.
  • A selected hole is either an oval 13×3 mm slot or a round hole 7 mm in diameter. Leave room for it.

Avoid

  • Do not put the logo over the magnetic stripe.
  • Do not choose a hole for an NFC or chip card. Hole punching is unavailable for those card types.

Text that is readable on a card

The card measures 85.6 × 53.98 mm. Text that looks large when zoomed in on screen may be hard to read on the finished card.

Do this

  • Use clear typefaces and give important information enough space.
  • Check the text size shown in the editor. Screen zoom does not reliably show the card's physical size.
  • Check personalized cards with the longest names and entries in your list.

Avoid

  • Do not let text overflow its text box. Check that all content is visible in the preview.
  • Avoid thin, light typefaces on a dark background.

Technical dimensions

Use these dimensions when preparing a finished artwork file. If you create the card in the editor, it handles card dimensions and print resolution for you.

Card size (CR80, ISO 7810 ID-1)85.6 × 53.98 mm
Bleed on all sides1 mm
Corner radius3.18 mm
Artwork with bleed, 300 dpi1035 × 661 px
Artwork with bleed, 600 dpi2069 × 1322 px
Magnetic stripe (back)y 5.54 mm, height 12.7 mm
Chip contacts (front)12 × 11 mm
Hole punchoval 13 × 3 mm or round Ø 7 mm
Logos and imagesSVG, PNG, JPG, WebP. SVG and PNG support transparent backgrounds.
Finished card artworkPDF, PNG, JPG, WebP. A PDF may contain several pages and cards. Check dimensions, bleed, and page pairing before import.
Personalization data fileCSV, Excel (.xlsx/.xls), one row per card

Not sure whether your artwork is ready? Send it to info@tryckkort.se and we will review it before you order and tell you if anything needs changing.

Check your design before ordering

Preview both sides and check text, images, and personal details. The preview shows the layout, but colors on screen can differ from the finished print.

Design your card

Or start with a ready-made template →